TMS zl Management and Configuration Guide ST.1.0.090213

4-12
Firewall
Named Objects
Address Groups
Address groups are user-defined groupings of address objects. Any number or
type of address objects can be placed in an address group. An address object
can belong to more than one address group. You can create up to 1000 address
groups, each with up to 500 address objects. You can use address groups when
creating firewall access policies.
To add an address group, follow these steps:
1. Select Firewall > Access Policies and click the Address Groups tab.
2. Click Add Address Group.
Figure 4-4. Add Address Group Window
3. In the Group Name field, specify a name for the address group.
Note You can use only letters, numbers, and the underscore character (_) in
this field.
4. From the Available Addresses list, select an address object.
5. Click the Move Right button to move the object into the Group Members list.
6. Select and move all of the address objects that you want to include in the
address group.
7. Click Apply.
8. Create another address group or click Close.
9. Click Save.