TMS zl Management and Configuration Guide ST.1.0.090213

4-16
Firewall
Named Objects
2. Click Add Service.
Figure 4-5. Add Service Window
3. In the Name field, type the name of the service.
Note You can use only letters, numbers, and the underscore character (_) in
this field.
4. From the Protocol list, select a protocol.
If you select TCP or UDP in step 4, in the Port(s) fields, type the port
number range, or if there is only one port number, type it in the first field.
When creating a service object for a well-known service on an alternative
port, you may also need to configure a port-to-service association. (See
“Port Mapping” on page 4-71.)
5. Click Apply.
6. Add another service object or click Close.
7. Click Save.
Service Groups
Service groups are user-defined groupings of service objects. Any number of
service objects can be placed in a service group, and a service object can be
in more than one service group. You can create up to 500 service groups, each
with up to 500 service objects.
To add a service group, follow these steps:
1. Select one of the following:
• Firewall > Access Policies and click the Service Groups tab
• Firewall > NAT Policies and click the Service Groups tab