TMS zl Management and Configuration Guide ST.1.0.090213

4-41
Firewall
Pinging
Figure 4-26. Add Policy Window
12. Click Apply, and then click Close.
Sending a Ping from the TMS zl Module
To ping an IP address or hostname, complete the following steps:
1. Select System > Utilities > Ping.
2. For Hostname/IP Address, type the hostname or IP address of the device
you are trying to reach.
3. For Count, select the number of ping messages you want to the module to
send.
4. For Packet Size, type the number of bytes you want to be included in each
ping packet sent (0–65507).
5. Click Ping. The results of the ping are displayed in the Results field.