TMS zl Management and Configuration Guide ST.1.0.090213

4-53
Firewall
User Authentication
This window displays each RADIUS server’s:
■ Address
■ Secret key
■ NAS ID
■ Domain name
■ Whether you are stripping the domain
2. Under RADIUS Global Configuration, select an authentication Protocol from
the list.
You can configure up to three RADIUS servers on each domain. To add a
RADIUS server, complete the following:
1. Click Add RADIUS Server. The Add RADIUS Server window is displayed.
Figure 4-34. Add RADIUS Server Window
2. In the Server Address field, type the IP address or FQDN of your RADIUS
server. The port is always 1812.
3. In the Secret field, type the secret key for your RADIUS server.
4. In the NAS Identifier field, type the NAS ID associated with the module.
The default NAS Identifier is the module’s hostname.
Note The field NAS-Identifier is only sent for CHAP and MS-CHAP authentica-
tion requests (not for PAP requests).
5. For Domain Name, type the domain name associated with your RADIUS
server.