TMS zl Management and Configuration Guide ST.1.0.090213

4-85
Firewall
Port Triggers
5. From the Protocol/Ports list, specify the port on which the application
makes its control connection by doing one of the following:
• Select a service object from the list. Service groups are not displayed
in this list. Do not select service objects with multiple ports.
• Click Options.
– Select Enter custom Protocol/Ports.
–For Protocol/Ports, select TCP or UDP.
–For Ports, type a port or range of ports.
6. For Allow Inbound Connections to Source, specify the inbound dynamic
ports by doing the following:
a. Select a Protocol from the list.
b. Type the port (range) in the Ports fields.
7. For Allow Outbound Connections from Source, specify the outbound
dynamic connections by doing the following:
a. Select a Protocol from the list.
b. Type the port (range) in the Ports fields.
8. Optionally, select the Allow inbound connections from any machine check
box. This allows anyone on the outside to contact the Source; this is useful
when your clients might have different IP addresses each time.
9. Select the Enable this port trigger check box.
10. Click OK and Close.
11. Click Save.
Example Port Trigger
In this example, a port trigger will be added for an application which uses TCP
1584–1585 for its control connections, then opens TCP 51200–51201 and TCP
51210 for inbound packets and UDP 7175 and TCP 8680–8686 for outbound
packets.