TMS zl Management and Configuration Guide ST.1.0.090213

4-87
Firewall
Port Triggers
7. Under Allow Outbound Connections from Source, do the following:
•Select UDP, then type 7175 in the Ports field.
•Select TCP, then type 8680 and 8686 in the Ports fields.
8. Select the Allow inbound connections from any machine check box.
9. Select the Enable this port trigger check box.
Figure 4-60. Add Port Trigger Window
10. Click OK and Close.
11. Click Save.
12. Configure a firewall access policy with the following parameters:
• Action — Permit Traffic
• From — INTERNAL
• To — EXTERNAL
• Service — TCP 1584–1585
• Source — Any Address
• Destination — 172.19.55.0/24 and 172.23.11.0/24 (create a multiple-
entry network address object as shown in “Address Objects” on
page 4-9).
13. Configure another access policy to permit the reverse traffic. See “Fire-
wall Access Policies” on page 4-19 for instructions.