TMS zl Management and Configuration Guide ST.1.0.090213

5-28
Network Address Translation
NAT Examples
g. For Source, click Options, select Enter custom IP, IP/mask or IP-Range,
and type 192.168.8.0/21.
h. For Destination, click Options, select Enter custom IP, IP/mask or IP-
Range, and type 10.1.1.0/24.
i. Select the Enable this Policy check box to enable the access policy.
j. Select the Enable IPS for this Policy check box if you want to enable
IPS to check packets on this policy.
k. Optionally, select the Enable logging on this Policy check box to log
access policy activities.
Note It is not recommended that you enable logging permanently because
policy logging is processor intensive. Use logging for troubleshooting
and testing only.
l. In the Insert Position (Optional) field, specify the priority of this access
policy so that it will be processed correctly.
Figure 5-13. Add Policy Window—Module 1
m. Click Apply.
3. Click Save.