TMS zl Management and Configuration Guide ST.1.0.090213

5-34
Network Address Translation
NAT Examples
f. For Service, accept the default: Any Service.
You could also limit the internal devices to accessing certain services.
g. For Source, select VLAN10.
h. For Destination, select VLAN20.
i. Select the Enable this Policy check box to enable the access policy.
j. Select the Enable IPS for this Policy check box to enable IPS to check
packets on this policy.
k. Optionally, select the Enable logging on this Policy check box to log
access policy activities.
Note It is not recommended that you enable logging permanently because
policy logging is processor intensive. Use logging for troubleshooting and
testing only.
Figure 5-18. Add Policy Window
l. Click Apply.
m. Click Close.
n. Click Save.