TMS zl Management and Configuration Guide ST.1.0.090213

5-40
Network Address Translation
NAT Examples
3. Configure a NAT policy to translate HTTP traffic.
a. Click Add Policy again.
Figure 5-24. Add NAT Policy Window
b. Select Destination for the translation type.
c. For From Zone, select INTERNAL.
d. To Zone is automatically set to Self.
e. For Service, select http.
f. For Source, select Any Address.
g. For Destination, select Web_Services.
h. For NAT IP address, type 10.1.1.12.
i. For NAT Port (Optional), type 8088.
j. Click OK.
k. Click Save.
4. Create a firewall access policy to permit the NAT traffic
a. Click Firewall > Access Policies > Unicast.
b. Click Add a Policy.