TMS zl Management and Configuration Guide ST.1.0.090213

1-15
Overview
Deployment Options for Routing Mode—Threat Protection
Figure 1-3. Internal Deployment of the TMS zl Module
Deployment Tasks for Internal Threat Protection
You must complete these tasks to deploy a TMS zl Module that provides
internal threat protection:
1. As you deploy the TMS zl Module, you may cause network outages. You
should complete these steps during the network’s lowest utilization times.
2. Install the TMS zl Module in a ProCurve Series 5400zl switch or ProCurve
8212zl switch that is in a core location.
3. Verify that the host switch’s configuration includes every VLAN that you
want to route through the module—whether you want to control traffic
that is forwarded on that VLAN, that originates from that VLAN, or both.