TMS zl Management and Configuration Guide ST.1.0.090213

6-31
Intrusion Detection and Prevention
Configuring IDS/IPS
TMS-Subscription Hardware ID. If you have booted the TMS zl Module to
the Product OS, you can obtain the TMS-subscription hardware ID from:
■ Product OS context of the CLI
■ Web browser interface
To obtain the TMS-subscription hardware ID from the Product OS context of
the CLI, you must first access the host switch’s CLI. Then, from the manager-
level context of the host switch’s CLI, complete the following steps:
1. Enter the Product OS context by typing the following command:
2. Display the TMS-subscription hardware ID by typing the following com-
mand:
3. Record the TMS-subscription hardware ID. (You may want to copy this
hardware ID to a text file.) You will use the TMS-subscription hardware
ID to register the IDS/IPS signature subscription.
If you would prefer to obtain the TMS-subscription hardware ID from the Web
browser interface, complete the following steps:
1. Access the TMS zl Module’s Web browser interface, and select Intrusion
Prevention/Detection > Signatures > Download.
2. The TMS-subscription hardware ID is shown under IPDS Subscription
Hardware ID at the bottom of the window. (You may want to copy this
hardware ID to a text file.) You will use the TMS-subscription hardware
ID to register the IDS/IPS signature subscription.
Syntax: services <slot ID> <product index>
Moves you to the Product OS context.
Replace <slot ID> with the letter of the chassis slot in which
the module is installed.
Replace <product index> with the index number that your
particular switch has assigned the TMS zl Module.
Syntax: show ips
Displays the IPS information, including the TMS-sub-
scription hardware ID.