TMS zl Management and Configuration Guide ST.1.0.090213

7-31
Virtual Private Networks
IPsec VPNs
Figure 7-15. VPN > IPsec > IKEv1 Policies Window (Policy Added)
Move to the next task:
■ If you selected DSA or RSA signatures for the authentication method,
“Install Certificates for IKE” on page 7-37.
■ If you selected pre-shared key for the authentication method, “Create an
IPsec Proposal” on page 7-53.
Create an IKE Policy for a Client-to-Site IPsec VPN. Follow these
steps to create an IKE policy that the TMS zl Module can use to negotiate VPN
connections with remote clients:
1. In the left navigation bar of the Web browser interface, select VPN > IPsec.
2. Click the IKEv1 Policies tab.
Figure 7-16. VPN > IPsec > IKEv1 Policies Window
3. Click Add IKE Policy.
4. For IKE Policy Name, type a string that is unique to this policy. For example,
type ClientVPN.
The string can include 1 to 15 alphanumeric characters.
5. For IKE Policy Type, select Client-to-Site (Responder).