TMS zl Management and Configuration Guide ST.1.0.090213

7-33
Virtual Private Networks
IPsec VPNs
7. For Local ID, configure the ID that the TMS zl Module sends to authenticate
itself. This ID must match exactly, in both type and value, the remote ID
specified on remote endpoints. For more information about ID types, see
“IKE Phase 1” on page 7-9.
a. For Type , select the ID type:
– IP Address
– Domain Name
– Email Address
– Distinguished Name
b. For Value, type the correct value.
If you select IP Address for Ty pe , the address that you specify in the
Value box must match the IP address that you specified for the local
gateway.
Table 7-4 shows the format for each ID type.
Table 7-4. Local ID Values
8. For Remote ID, specify an ID that matches the ID that remote clients send
to authenticate themselves:
a. For Type , select the ID type:
– IP Address
– Domain Name
– Email Address
– Distinguished Name
b. For Value, type the correct value.
For the remote ID value, you can use wildcards to accommodate
multiple user IDs. Table 7-5 displays valid values and wildcards.
Local ID Type Remote ID Value Examples
IP Address A.B.C.D 172.16.40.103
Domain Name <domainname> TMS.procurve.com
Email Address <name>@<domainname> [e-mail]
Distinguished Name /CN=<commonname> /CN=TMS.procurve.com