TMS zl Management and Configuration Guide ST.1.0.090213

7-34
Virtual Private Networks
IPsec VPNs
Table 7-5. Remote ID Values and Wildcards
9. Click Next.
Figure 7-18. Add IKE Policy Window—Step 2 of 3
10. Under IKE Authentication, configure the authentication method for the IKE
proposal:
a. For Key Exchange Mode, select Main Mode or Aggressive Mode.
The mode must match that configured on remote endpoints. See IKE
modes in “IKE Phase 2” on page 7-13 for guidelines.
Remote ID Type Remote ID Value Wildcard Example Example Wildcard
IP Address A.B.C.D 0.0.0.0 172.16.40.103 0.0.0.0
Domain Name <name.domainname> <domainname> user1.procurve.com procurve.com
Email Address <name>@<domainname>*@<domainname> [e-mail] *@procurve.com
Distinguished
Name
/CN=<commonname>•/CN=*
•/*
/CN=TMS.procurve.com • /CN=*.procurve.com
•*