TMS zl Management and Configuration Guide ST.1.0.090213

7-69
Virtual Private Networks
IPsec VPNs
Figure 7-57. Add IPsec Policy Window—Step 2 of 4 (Top Section)
12. For Local Gateway, specify an IP address that the remote endpoint can
reach. You have two options:
•Select IP Address and type an IP address on the module in the box.
The IP address must be an IP address already configured on the
TMS zl Module. Type the address that the remote gateway can reach.
•Select Use VLAN IP Address and select a VLAN from the list.
Select the VLAN on which the remote gateway reaches the TMS zl
Module.
13. For Remote Gateway IP Address under Peer ID, specify the IP address of the
remote gateway.
You must type the IP address that the remote gateway specifies for its
local IP address. Use the IP address at which the TMS zl Module can reach
the remote gateway (typically, a public IP address).