TMS zl Management and Configuration Guide ST.1.0.090213

7-103
Virtual Private Networks
Layer 2 Tunneling Protocol (L2TP) over IPsec
Figure 7-79. VPN > IPsec > L2TP Remote Access Window
3. Click Add Dial-In User.
Figure 7-80. Add Dial-In User Window—Step 1 of 3
4. For Dial-In User Name, type a name for this user. The name can be 1 to 16
alphanumeric characters.
This setting only affects how the user is displayed in the dial-in user list
on the module.
5. For Server IP Address/Subnet Mask, type the IP address and subnet of the
TMS zl Module in its capacity as L2TP Network Server (LNS). For exam-
ple, type 172.16.80.1/24.
This is a virtual IP address in an unused subnet (the subnet must not be
configured as a TMS VLAN or a VLAN on the host switch). The subnet will
be automatically placed in the External zone.