TMS zl Management and Configuration Guide ST.1.0.090213

7-105
Virtual Private Networks
Layer 2 Tunneling Protocol (L2TP) over IPsec
10. For Policy Group Name, select the user group that you configured on the
TMS zl Module. (Step 1 on page 7-96.)
When you configure firewall access policies that control how the L2TP
clients use the local network, you will configure them for this user group.
11. For Authentication Protocol, select the protocol used to authenticate the
client:
•Any
• MS-CHAP
• CHAP
•PAP
• None
If you want to use the default settings for Windows XP or Vista clients,
select Any or MS-CHAP.
12. If you selected an authentication protocol in the previous step, you must
configure the user’s dial-in credentials:
a. For User, type the username that the remote client will use to log on
to the VPN connection.
b. For Password, type the password for the username.
13. Click Next.
Figure 7-82. Add Dial-In User Window—Step 3 of 3
14. For Default Gateway, type the IP address that you specified in step 5
(without the subnet mask).