TMS zl Management and Configuration Guide ST.1.0.090213

7-123
Virtual Private Networks
Configure Firewall Access Policies for Your VPN
Figure 7-93. Add Policy Window
g. Click Apply.
4. Allow IKE messages to the remote endpoints.
a. For Action, leave the default, Permit Traffic.
b. For From, select Self.
c. For To, select the remote zone.
d. For Service, select isakmp.
e. For Source, type Any Address.
f. For Destination, leave Any Address or specify the local gateway IP
address.
5. Permit L2TP traffic from the remote endpoints:
a. For Action, leave the default, Permit Traffic.
b. For From, select the remote zone.
c. For To, select Self.
d. For Service, select the l2tp-udp.