TMS zl Management and Configuration Guide ST.1.0.090213

7-128
Virtual Private Networks
Configure Firewall Access Policies for Your VPN
e. For Source, specify the actual IP address of the remote tunnel
endpoint.
This is the IP address configured as the remote address is the GRE
tunnel. It is different from the address configured on the subnet
reserved for the tunnel.
You can select a previously-configured address object or type the IP
address manually. (Click Options and select the custom option.)
f. For Destination, leave Any Address or specify an actual module IP
address on a TMS VLAN that the remote endpoint can reach.
This is the IP address configured as the local address in the GRE
tunnel. It is different from the address configured on the subnet
reserved for the tunnel.
Figure 7-96. Add Policy Window
g. Click Apply.
6. Allow GRE traffic from the TMS zl Module to the remote tunnel endpoint:
a. For Action, leave the default, Permit Traffic.
b. For From, select Self.
c. For To, select the remote zone.