TMS zl Management and Configuration Guide ST.1.0.090213

7-135
Virtual Private Networks
Configure Firewall Access Policies for Your VPN
Figure 7-101. Add Policy Window
g. Click Apply.
9. Permit local traffic that is sent across the tunnel:
a. For Action, leave the default, Permit Traffic.
b. For From, select the local zone.
c. For To, select the tunnel zone.
d. For Service, leave Any Service.
This is the most basic configuration. You could also permit only
certain types of traffic.
e. For Source, specify the local IP addresses that are allowed to send
traffic on the tunnel.
f. For Destination, specify the subnet specified in the tunnel’s traffic
selector.