TMS zl Management and Configuration Guide ST.1.0.090213

7-146
Virtual Private Networks
Configure the VPN Client
Figure 7-109. ProCurve VPN Client—Security Policy Editor—My Identity
Note that the module’s IKE policy might use wildcards, which allows
multiple values to match the policy. For example, the remote ID type and
value in the module’s IKE policy might be Email Address and *@pro-
curve.com. In the My Identity window, you would select E-mail Address for
ID Type. You could then type, for example, [e-mail] in the box
below.
Note When you select IP Address for the ID Type, the ProCurve VPN client
automatically submits the IP address on which it makes the connection.
When the client uses a certificate, it automatically submits the subject
name in the certificate for its ID. You must verify that the certificate
includes a subject name of the type that you selected in the previous step
and that the subject name matches the remote ID configured on the TMS zl
Module.
14. In the left navigation pane of the Security Policy Editor, expand Security
Policy.
15. Expand Authentication (Phase 1) and click Proposal 1.