TMS zl Management and Configuration Guide ST.1.0.090213

7-164
Virtual Private Networks
Configure the VPN Client
Figure 7-125. IPSecuritas—Connections > Phase 1 Tab
15. Accept the remaining defaults and click the Phase 2 tab.
16. Configure the following settings, which must match settings in the TMS
zl Module’s IPsec proposal and IPsec policy:
a. For Lifetime, select Seconds and type a value in the box.
b. For PFS Group, select one of the following:
– 768 (1) — DH group 1
– 1024 (2) — DH group 2
– 1536 (5) — DH group 5
c. For Encryption, select one (or more) of the following check boxes:
– DES
– 3DES
– AES 256
– AES 192
– AES 128
d. For Authentication, select one (or more) of the following check boxes:
– HMAC MD5
– HMAC SHA-1