TMS zl Management and Configuration Guide ST.1.0.090213

7-175
Virtual Private Networks
Configure the VPN Client
Figure 7-135. Windows XP—New Connection Wizard
10. If the Public Network page is displayed, specify whether the client needs
to make a dial-up connection. If the workstation’s Internet connection is
through a dial-up connection, select that connection for Automatically dial
this initial connection. Otherwise, select Do not dial the initial connection.
11. Click Next.
12. For Host name or IP address, type the TMS zl Module’s public IP address or
type an FQDN that resolves to this address.
This IP address or FQDN must be the Local Gateway IP Address in the IKE
policy configured on the TMS zl Module. Typically, it is the IP address on
a VLAN in the external zone.