TMS zl Management and Configuration Guide ST.1.0.090213

7-182
Virtual Private Networks
Configure the VPN Client
Figure 7-144. Windows XP—IPSec Settings Window
b. Select the Use pre-shared key for authentication check box.
c. For Key, type the preshared key that you specified in the IKE policy
on the TMS zl Module and click OK.
31. Click OK to close the <connection name> Properties window and return to
the Connect <connection name> window.
Figure 7-145. Connect <connection name> Window
32. For User Name, type the username that you specified for a dial-in user on
the TMS zl Module.
Note that the username must match the setting for User in the Add Dial-In
User—Step 2 of 3 window, not the setting for Dial-In User Name in the Add
Dial-In User—Step 1 of 3 window.