TMS zl Management and Configuration Guide ST.1.0.090213

7-186
Virtual Private Networks
Configure the VPN Client
L2TP Dial-in User (one user for each client)
Dial-In User
Name
Any unique string that you desire Add Dial-In User—
Step 1 of 3
Server IP
Address/Mask
Any IP address in a private subnet not in use in your
network
User IP Address Any IP address that is:
• In the same subnet as the server IP address
• Not assigned to another dial-in user
Authentication None
Policy Group
Name
The group on the TMS zl Module that has been
configured with access policies for the remote
user
Authentication
Protocol
•Any
•CHAP
•PAP
•MS-CHAP
User Matches the username submitted by the remote
client
Add Dial-In User—
Step 1 of 3
User name configured in
step 92 on page 7-217
Password Match the string submitted by the remote client Password configured in
step 93 on page 7-218
Default Gateway Matches the server IP address configured in the
Add Dial-In User—Step 1 of 3 Window
Add Dial-In User—
Step 3 of 3
• Primary DNS
Server
• Secondary
DNS Server
• Primary WINS
server
• Secondary
WINS server
IP addresses of your network’s servers (to which
TMS firewall access policies permit the remote
client access)
Parameter Valid Settings Configuration
Window
Matching Setting on the
Windows XP Client