TMS zl Management and Configuration Guide ST.1.0.090213

7-187
Virtual Private Networks
Configure the VPN Client
Manual Windows XP Client Configuration
The manual configuration is intended only for advanced users who want to
select different security settings than the defaults. Generally, it is recom-
mended that you set up the VPN with the New Connection Wizard (see
“Configuration with the New Connection Wizard” on page 7-172).
Before you configure the VPN connection, make sure to uninstall the HP
ProCurve VPN client or any other third-party VPN client; these clients can
interfere with the Windows XP client.
Follow these steps to manually configure the Windows XP client for the VPN
connection:
1. On the Windows XP client, click Start > Run.
2. Type regedit and click OK.
3. Navigate to HKEY_LOCAL_MACHINE > System > CurrentControlSet > Services
> RasMan > Parameters.
Firewall access policies
User Group None • Permit Self <remote endpoints’ zone> UDP 1701
Any Any
• Permit <remote endpoints’ zone> Self UDP 1701
Any Any
• Permit Self <remote endpoints’ zone> isakmp
Any Any
• Permit <remote endpoints’ zone> Self isakmp
Any Any
Add Policy
User Group None
or User Group
<group
configured for
the dial-in user>
• Permit External <local zone> <service> <virtual
dial-in addresses> <local addresses>
• Permit <local zone> External <service> <local
addresses> <virtual dial-in addresses>
Add Policy
Parameter Valid Settings Configuration
Window
Matching Setting on the
Windows XP Client