TMS zl Management and Configuration Guide ST.1.0.090213

7-217
Virtual Private Networks
Configure the VPN Client
86. Click Properties to open the <connection name> Properties window.
87. Click the Networking tab.
88. For Type of VPN, select L2TP IPSec VPN.
Figure 7-186. Windows XP—<connection name> Properties
Window > Networking Tab
89. Select Internet Protocol (TCP/IP) in the This connection uses the following
items box and click Properties.
90. Ensure that Obtain an IP address automatically and Obtain DNS server address
automatically are selected so that the TMS zl Module can assign these
values while the client is visiting the private network. Click OK to exit.
91. Click OK to close the <connection name> Properties window and return to
the Connect <connection name> window.
92. For User Name, type the username that you specified for a dial-in user on
the TMS zl Module.
Note that the username must match the setting for User in the Add Dial-In
User—Step 2 of 3 window not the setting for Dial-In User Name in the Add
Dial-In User—Step 1 of 3 window.