TMS zl Management and Configuration Guide ST.1.0.090213

7-234
Virtual Private Networks
Configure the VPN Client
This IP address must be the Local Gateway IP Address in the IKE policy
configured on the TMS zl Module. It must also be the Local Address in the
module’s IPsec policy traffic selector. Often, it is the IP address on a VLAN
in the External zone.
Figure 7-203. Windows Vista—Filter Properties Window >
Addressing Tab (Addresses Configured)
30. Select the Protocol tab.
31. For Select a protocol, select UDP.
32. In the Set the IP protocol port section, select From this port. Type 1701 in the
box below.
33. Select To this port. Type 1701 in the box below.