TMS zl Management and Configuration Guide ST.1.0.090213

7-266
Virtual Private Networks
Configure the VPN Client
L2TP Dial-in User (one user for each client)
Dial-In User Name Any unique string that you desire Add Dial-In User—Step
1 of 3
Server IP Address/
Mask
Any IP address in a private subnet not in use
in your network
User IP Address Any IP address that is:
• In the same subnet as the server IP
address
• Not assigned to another dial-in user
Authentication • None
• Authenticate Peer
• Authenticate With Peer
• Both
Preshared Key Not applicable when Authentication is None
Matches the password configured in the
registry of the L2TP client
Password configured in
step 8 on page 7-226
Policy Group Name The group on the TMS zl Module that has
been configured with access policies for the
remote user
Authentication Proto-
col
•Any
•PAP
• CHAP
User Matches the username submitted by the
remote client
Add Dial-In User—Step
2 of 3
User name configured in
step 76 on page 7-256
Password Match the string submitted by the remote
client
Password configured in
step 77 on page 7-256
Default Gateway Matches the server IP address configured in
the Add Dial-In User—Step 1 of 3 Window
Add Dial-In User—Step
3 of 3
• Primary DNS
Server
• Secondary DNS
Server
• Primary WINS
server
• Secondary WINS
server
IP addresses of your network’s servers (to
which TMS firewall access policies permit
the remote client access)
Parameter Valid Settings Configuration Window Matching Setting on the
Windows Vista Client