Manualshelf

TMS zl Management and Configuration Guide ST.1.0.090213

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
781782783784785786787788789790
9-42
Routing
OSPF
Enable OSPF on a VLAN
You must enable OSPF on each TMS VLAN that you want to participate in
sending and receiving OSPF messages. When you enable OSPF on a TMS
VLAN, you will also define the VLAN’s area and other settings.
You can place more than one TMS VLAN in the same OSPF area, and you can
configure multiple OSPF areas.
To place a enable OSPF on a TMS VLAN and add it to an area, complete the
following steps:
1. Select Network > Routing and click the OSPF tab.
Figure 9-13. Network > Routing > OSPF Window
2. Click Enable OSPF on a VLAN. The Enable OSPF on a VLAN window is
displayed.