TMS zl Management and Configuration Guide ST.1.0.090213

9-48
Routing
OSPF
Note It is not recommended that you enable logging permanently, because
policy logging is processor-intensive. Use logging for troubleshooting and
testing only.
11. In the Position field, specify the priority of this access policy. Be sure that
you set the position of this policy above the position of the policy that
allows all Zone1-to-Internal zone OSPF traffic.
12. Click Apply. Then you can optionally click the Advanced tab to further
narrow the policy. For more information about the Advanced tab, see
“Advanced Tab” in Chapter 4: “Firewall.”
13. Click Close.
Example OSPF Setup
Figure 9-17 shows an example OSPF router setup using TMS zl Modules.