TMS zl Management and Configuration Guide ST.1.0.090213

A-8
Threat Management Services zl Module Command-Line Reference
Services OS Manager Context Commands
Services OS Manager Context
Commands
The Services OS operator context allows restricted access to some trouble-
shooting commands on the Services OS of the module.
To access this context, enter the following command from the host switch’s
operator-level context:
For example, if you want to enter the Services OS for the TMS zl Module in
slot C, enter one of the following commands:
hostswitch> services c 1
hostswitch> services c name services-module
To verify your location in the CLI, check the prompt. In the Services OS
manager context, the prompt is one of the following:
■ ProCurve(services-module-<slot ID>:HD)#
This is the prompt that is displayed if you have entered the Services OS
CLI and the Services OS is booted.
■ ProCurve(services-module-<slot ID>:PR)#
This is the prompt that is displayed if you have entered the Services OS
CLI and the Product OS is booted.
The commands in this section are the Services OS CLI commands with the
Services OS booted.
Syntax: services <slot ID> < <product index> | name <product name> >
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the chassis slot in which
the module is installed.
Replace <product index> with 1. The Services OS context is
always assigned index number 1.
Replace <product name> with services-module. The Services OS
context is always assigned product name services-module.