TMS zl Management and Configuration Guide ST.1.0.090213

A-9
Threat Management Services zl Module Command-Line Reference
Services OS Manager Context Commands
Figure A-2. CLI Context Command Groups
To access all commands in the Services OS manager context, you must boot
the module in the Services OS using the boot command. Until the module is
booted in the Services OS, you can access a limited set of commands, including
boot, licenses, exit, and some show commands.
The following sections describe commands that are available from the man-
ager context of the Services OS.
boot
This command allows you to boot the module’s different operating systems.
You can boot the Services OS, the Product OS, and the CF Services OS.
To boot an OS, enter the following command:
Syntax: boot [ service | product | cf_service ]
The module will tell you that you are changing operating systems and that the
module will reboot. You will be prompted to continue.
If you do not select an OS, the module will simple be rebooted in the
current OS.