TMS zl Management and Configuration Guide ST.1.0.090213

A-16
Threat Management Services zl Module Command-Line Reference
Product OS Manager Context Commands
show temperature
This command shows the temperature of the blade in degrees Celsius.
Syntax: show temperature
show version
This command shows the software version.
Syntax: show version [details]
Product OS Manager Context
Commands
The Product OS operator context features a limited number of commands that
allow an operator to collect troubleshooting information. To access the Prod-
uct OS operator context, enter the operator context of the CLI of the switch
in which the TMS zl Module. Then enter the following command:
You can also access the Products OS operator context by accessing the TMS
zl Module through SSH and logging in as a management user with operator
rights. (The SSH client must be able to contact a TMS zl Module IP
address.When the TMS zl Module operates in routing mode, the SSH client
must also be in a management zone.)
Syntax: services <slot ID> < <product index> | name <product name> >
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the chassis slot in which
the module is installed.
Replace <product index> with the product index assigned tot he
TMS zl Module. See
Replace <product name> with services-module. The Services OS
context is always assigned product name services-module.