TMS zl Management and Configuration Guide ST.1.0.090213

A-22
Threat Management Services zl Module Command-Line Reference
Product OS Manager Context Commands
Replace <username> with the username on the account on your FTP or SCP
server.
These commands are also available in the global configuration context.
end
To return to the manager context, enter end. The end command moves you
back to the manager context, regardless of the context from which you enter
the command.
Syntax: end
This command is available from all contexts.
erase
This command exits the current session and reboots the router with the
factory default startup-configuration. The TMS zl Module CLI notifies you that
the startup configuration will be restored to the factory default and the module
will be rebooted; then it asks if you want to continue.
Syntax: erase startup-config
Note All of your signatures will be lost if you restore your module to a previous
configuration or to factory default settings.
exit
To leave a specific interface or configuration mode, enter exit. The exit
command moves you back one mode level. For example, if you were in the
HA configuration context and entered exit, you would return to the global
configuration context.
Syntax: exit
This command is available from all contexts.
logout
Exit the current CLI session and return to the login screen.
Syntax: logout