TMS zl Management and Configuration Guide ST.1.0.090213

A-23
Threat Management Services zl Module Command-Line Reference
Product OS Manager Context Commands
no connections
To close existing connections for a specific source or destination address,
source or destination port, or access policy, enter the following:
Syntax: no connections [sip <source IP address>] [dip <destination IP address>] [sp
<source port>] [dp <destination port>] [pid <access policy number>]
Replace <source IP address> with IP address for which you want to close
all outbound connections.
Replace <destination IP address> with IP address for which you want to
close all inbound connections.
Replace <source port> with port for which you want to close all outbound
connections.
Replace <destination port> with port for which you want to close all
inbound connections.
Replace <pid> with the access policy that allowed the connections that you
want to close.
nslookup
This command is used to learn a device’s IP address according to its hostname.
Syntax: nslookup <hostname>
Replace <hostname> with the hostname you want to resolve.
For example, if you wanted to know the IP address for router5, you would
enter:
ProCurve(tms-module-<slot ID>)# nslookup router5
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as
space
or Ctrl+C.
Syntax: [no] page