TMS zl Management and Configuration Guide ST.1.0.090213

A-26
Threat Management Services zl Module Command-Line Reference
Global Configuration Context
write
This command is a file management command that manages the running-
config file. This command is similar to the copy command. The write memory
command saves the running-configuration to the startup-configuration. You
can enter the write memory command from any context.
Syntax: write memory
Global Configuration Context
From the global configuration context, you can make configuration changes
that apply to the entire module. You can configure the system’s global param-
eters such as the hostname, passwords, and banners. You can also configure
other features:
■ Firewall
■ NAT
■ VPN
■ IDS/IPS
■ Routing
Which of these options is available depends on the operating mode.
In routing mode, from the global configuration context, you can also access
other configuration contexts to configure specific router interfaces and func-
tions. These other contexts are:
■ RIP
■ PIM
■ OSPF
■ VLAN interfaces
To verify your location in the CLI, check the prompt. In the global
configuration context, the prompt is ProCurve(tms-module-<slot
ID>:config)#.