TMS zl Management and Configuration Guide ST.1.0.090213

A-34
Threat Management Services zl Module Command-Line Reference
Global Configuration Context
The sequence-out-of-range option allows you to specify addition parame-
ters. You can set the limit at which a packet is considered out-of-range and the
number at which the sequence numbers reset. To enable this check and specify
these parameters, enter the following commands:
Syntax: attack-setting sequence-out-of-range
Syntax: attack-setting sequence-out-of-range [maximum difference <RST number>]
The first command enables the attack check, and the second command sets
the parameters.
Replace maximum difference with the value for the maximum difference
between an acknowledged packet’s sequence number and a valid packet
sequence number (1–65535).
Replace <RST number> with the value at which you want the sequence
numbers to reset (1–65535).
banner
Set the banner that is displayed on the Web browser interface login page.
Syntax: [no] banner motd <banner text>
Replace <banner text> with the text that you want to display on the Web
browser interface login page. This text cannot contain any spaces.
batch
This command enables or disables batch, or scripting, mode.
Syntax: [no] batch
This command is also available from the Product OS manager context.
boot
This command exits the current session and reboots the module. Before
exiting the session, you will be asked to confirm that you want to reboot the
module.
Syntax: boot
This command is also available from the Product OS manager context.