TMS zl Management and Configuration Guide ST.1.0.090213

A-37
Threat Management Services zl Module Command-Line Reference
Global Configuration Context
For example, to set an absolute maximum of 3000 connections for the external
zone, enter the following command:
ProCurve(tms-module-<slot ID>:config)# connection-
settings limit external 3000
connection-settings timeout
Set a limit for the amount of time and inactive connection can stay open. You
can set these limits for the default services or you can create a custom timeout
setting. The default services and their default timeouts are listed in Table A-13.
Table A-13. Default connection-settings Timeouts
To adjust a default connection-settings timeout, enter the following command:
Syntax: [no] connection-settings timeout default <service> <timeout>
Replace <service> with a default service. Available default services are listed
in Table A-13.
Replace <timeout> with the number of seconds that you want an inactive
session to remain open.
For example, to set the default TCP session timeout to 100 seconds, enter the
following command:
ProCurve(tms-module-<slot ID>:config)# connection-
settings timeout default tcp 100
zone4 21428
zone5 21428
zone6 21428
Zone Default connection-settings
Limits
Default Service Description Default connection-settings
Timeout
tcp TCP session 600
udp UPD session 60
icmp ICMP session 60
tcp-handshake TCP handshake duration 30
tcp-reset TCP once RST is sent 0