TMS zl Management and Configuration Guide ST.1.0.090213

A-40
Threat Management Services zl Module Command-Line Reference
Global Configuration Context
Replace <destination server location> with the IP address of your TFTP
server.
Replace <destination filename> with the name that you want to assign to
the file.
Replace <username> with the username on the account on your FTP or SCP
server.
To upload a configuration file from an external TFTP, FTP, or SCP server to
the module’s startup-config, enter one of the following commands:
Syntax: copy tftp < startup-config | image > <source server location> <source
filename> user <username>
Syntax: copy < ftp | scp > < startup-config | image > <source server location> <source
filename>
Replace <source server location> with the IP address of your TFTP or SCP
server.
Replace <source filename> with the name of the file you are uploading from
your server.
Replace <username> with the username on the account on your FTP or SCP
server.
These commands are also available in the Product OS manager context.
dhcp-relay
This command configures DHCP servers to which the module forwards DHCP
requests.
Syntax: [no] dhcp-relay server <server address>
Replace <server address> with the IP address for your DHCP server.
For example:
ProCurve(tms-module-<slot ID>:config)# dhcp-relay server
10.10.2.54
dhcp-relay-enable
This command enables DHCP relay for VLANs on the module.