TMS zl Management and Configuration Guide ST.1.0.090213

A-50
Threat Management Services zl Module Command-Line Reference
Global Configuration Context
MIME. You can configure the following MIME parameters:
■ Maximum header size
■ Boundaries
To configure MIME protocol anomalies, enter the following command:
Syntax: [no] ips protocol-anomaly mime [ header-size <header size> | boundaries
<number of boundaries per message> ]
Replace <header size> with the maximum header size in bytes (100–2048).
Replace <number of boundaries per message> with the maximum num-
ber of boundaries allowed per message (1–10).
You can configure only one parameter at a time.
SMTP. To configure the SMTP header size, enter the following command:
Syntax: ips protocol-anomaly smtp header-size <header size>
Replace <header size> with the maximum header size in bytes (100–2048).
ips full-inspection
By default, the TMS zl Module inspects only the first the first few kilobytes of
each connection in each direction. However, you can specify that every packet
in every session be inspected by the IDS/IPS. This option consumes more
system resources but it also provides the best security effectiveness.
To configure the inspection option, enter the following command:
Syntax: ips full-inspection < enable | disable >
lldp
This command enables Layer Link Discovery Protocol.
Syntax: [no] lldp