TMS zl Management and Configuration Guide ST.1.0.090213

A-58
Threat Management Services zl Module Command-Line Reference
Global Configuration Context
The available parameters and options are shown in Table A-18. At the end of
the access-policy command, you can append various optional keywords,
which are listed in Table A-18 as <extended options>.
NAT Exclusion
Enter the following command to exclude specific services or addresses from
being translated:
Syntax: nat no-nat <source zone> <destination zone> < protocol | service <service>
> <source address> <destination address> [destination port] [extended options]
The available parameters and options are shown in Table A-18. At the end of
the access-policy command, you can append various optional keywords,
which are listed in Table A-18 as <extended options>.
Enter one of the following commands to delete a NAT policy:
Syntax: no nat id <policy ID>
Syntax: no nat [ source | destination | no-nat ] <source zone> <destination zone >
<policy position> |
Replace <policy ID> with the ID of the policy you want to delete.
Replace <source zone> with the source zone of the policy that you want to
delete.
Replace <destination zone> with the destination zone of the policy that you
want to delete. The destination zone for a destination NAT policy must be Self.
Replace <policy> with the position of the policy that you want to delete.
Table A-18. nat Command Options
Parameter Options
source zone • internal
• external
•dmz
• zone1
• zone2
• zone3
• zone4
• zone5
• zone6
• self