TMS zl Management and Configuration Guide ST.1.0.090213

A-62
Threat Management Services zl Module Command-Line Reference
Global Configuration Context
For example, to change the manager password to $tms*manager33, you
would enter:
ProCurve(tms-module-<slot ID>:config)# password manager
New password for manager: $tms*manager33
Please retype new password for manager: $tms*manager33
ping
This command sends an ICMP echo to a specified destination.
Syntax: ping < IP address | hostname >
Replace <IP address> with the IP address of the ping destination.
Replace <hostname> with the hostname of the ping destination.
The module displays the number of pings sent and responses received.
For example:
ProCurve(tms-module-<slot ID>)# ping 10.1.1.1
When you send ICMP echoes, the module displays the ping statistics to
describe the types of responses the router receives. For example, Figure A-8
shows a successful ping:
Figure A-8. Sending a Ping
If you need to halt a ping operation, press
Ctrl+Z.
This command is also available from the Product OS manager context.
Note If you cannot ping a device, check that you have configured an access policy
to allow ICMP/Echo traffic from the Self zone to the zone you are trying to ping.