TMS zl Management and Configuration Guide ST.1.0.090213

A-65
Threat Management Services zl Module Command-Line Reference
Global Configuration Context
radius-server
Use this command to specify the TMS zl Module’s RADIUS server. You can
configure several RADIUS parameters:
■ RADIUS protocol
• MS-CHAP
•CHAP
•PAP
■ Host IP address
■ Secret key
■ NAS IP address or hostname
■ Domain name
To specify the RADIUS protocol that the module will use, enter the following
command:
Syntax: radius-server protocol < ms-chap | chap | pap >
To specify a RADIUS server, enter the following command:
Syntax: radius-server host <host IP address> secret <secret key> nas-id <NAS IP
address or hostname> domain-name <domain name> [strip-domain]
Replace <host IP address> with the IP address of the RADIUS server.
Replace <secret key> with your RADIUS server’s secret key.
Replace <NAS IP address or hostname> with the IP address or hostname
of the device requesting access.
nntp ntp pcanywhere-data pcanywhere-
status
pim-auto-rp-tcp pim-auto-rp-udp pop2 pop3
pptp radius radius-acct rip
securied-udp smtp snmp snmptrap
sqlnet ssh syslog tacacs-tcp
tacacs-udp talk-tcp talk-udp telnet
tftp time uucp who
whois xdmcp
user-configured service objects