TMS zl Management and Configuration Guide ST.1.0.090213

A-74
Threat Management Services zl Module Command-Line Reference
Global Configuration Context
schedule
This command creates a schedule object. With a schedule object, you can
configure the days and the time of day for which a firewall access policy
applies.
To create a schedule object, enter the following command:
Syntax: [no] schedule <object name> < daily | weekdays | weekends | <days of the
week>> < all-day | <start time> <end time> >
Replace <object name> with the name you want to assign to this schedule
object.
Replace <days of the weeks> with the day(s) of the week for which you
want to allow access. Separate each day of the week with a comma.
Replace <start time> and <end time> with the starting time and ending time
for which you want to allow user access. This time should be entered in hhmm
format, following a 24-hour clock.
All parameters are mandatory.
service
This command creates a service object.
Syntax: [no] service <service name> <protocol> <port>
For <service name> type the name that you want to give the service object.
Other options for this command are displayed in the following table.