TMS zl Management and Configuration Guide ST.1.0.090213

A-85
Threat Management Services zl Module Command-Line Reference
Product OS Show Commands
Product OS Show Commands
The Product OS show commands allow you to view information about, or the
current status of, an interface or feature. They help you to troubleshoot. The
show commands available in the Product OS are described in the sections
below. You can enter the commands from any context of the Product OS.
show access-policy
This command shows the firewall access policies currently configured on the
module. You can view policies by type of policy (multicast or unicast) or by
user group. Additionally, you can filter the results by source zone and desti-
nation zone.
To view all of the unicast firewall access policies, enter the following com-
mand:
Syntax: show access-policy [group <group name> | multicast ] [filter <source zone>
<destination zone>]
To view firewall access policies, according to user group, enter the following
command:
Syntax: show access-policy group <group name>
Replace <group name> with the name of the user group.
Replace <source zone> and <destination zone> with the access policy’s
source zone and destination zones, respectively.
The available zones for filtering are:
■ any
■ self
■ internal
■ external
■ dmz
■ zone1
■ zone2
■ zone3
■ zone4
■ zone5
■ zone6