TMS zl Management and Configuration Guide ST.1.0.090213

A-87
Threat Management Services zl Module Command-Line Reference
Product OS Show Commands
To view your banner text, enter the following command:
Syntax: show banner motd
show connection-settings
This command shows your connection restriction settings. You can view your
connections according to:
■ Absolute connection limits
■ Timeouts
■ Reservations
To view the connection settings, enter the following command:
Syntax: show connection-settings < limit | timeout [default] | reservation >
show connections
This command shows the active connections to your network. You can view
all of the active connections, or you can view them according to the following
factors:
■ Source zone
■ Destination zone
■ Source address
■ Destination address
■ Policy ID
To view the active connections on your network, enter the following com-
mand:
Syntax: show connections [sip <source IP address>] [dip <destination IP address>]
[szone <source zone>] [dzone <destination zone>] [pid <policy ID>]
Replace <source zone> with the source zone.
Replace <destination zone> with the destination zone.
Replace <source IP address> with the source IP address.
Replace <destination IP address> with the destination IP address.
Replace <policy ID> with the firewall policy ID number that permitted the
connection.