TMS zl Management and Configuration Guide ST.1.0.090213

A-88
Threat Management Services zl Module Command-Line Reference
Product OS Show Commands
Note This command shows the active connections on the module, whereas the
connections values displayed on the Web browser interface dashboard win-
dow show both active and passive connections. Therefore, these two connec-
tion values may be slightly different. You should not be concerned with the
difference between the two values, unless:
■ The maximum connection threshold for a zone is reached
■ The number of connections is unreasonably high
show dhcp-relay
This command shows the DHCP relay configuration.
Syntax: show dhcp-relay
show gre
This command shows the gre tunnels that are configured.
Syntax: show gre [tunnel name]
Replace <tunnel name> with the name of the GRE tunnel you want to display.
show high-availability
This command shows the HA configuration.
Syntax: show high-availability
show ip
This command shows interface information as well as routing information.
You can view information about:
■ RIP
■ OSPF
■ The routing table
■ The multicast routing table
■ PIM
■ IGMP configuration
■ Address interfaces
■ DNS server settings