TMS zl Management and Configuration Guide ST.1.0.090213

A-92
Threat Management Services zl Module Command-Line Reference
Product OS Show Commands
To view the IPS protocol anomaly settings, enter the following command:
Syntax: show ips protocol-anomaly
To view the IPS inspection settings, enter the following command:
Syntax: show ips full-inspection
show lldp
This command shows the LLDP configuration.
Syntax: show lldp
show logging
This command shows all of the logging information. You can view information
about:
■ Local logging (and reverse local logging)
■ Syslog forwarding
■ Email forwarding
■ SNMPv2 and SNMPv3 trap destinations
■ Logging thresholds
To view the local logging information, enter the following command:
Syntax: show logging local [reverse] [filter id <message ID>] [filter search <search>]
[filter severity < critical | major | minor | warning | information> ]
The log will be displayed with the most recent first. Optionally, enter reverse
to display the most recent log last.
To view all other logging information, enter the following command, choosing
the option for the type of log information you want to view:
Syntax: show logging < syslog | email | snmpv2 | snmpv3 | threshold >
show management
In monitoring mode, this command shows the management VLAN and IP
address.
In routing mode, this command lists all of the management-access zones.
Syntax: show management