TMS zl Management and Configuration Guide ST.1.0.090213

C-3
Log Messages
Reading the Log Messages
Reading the Log Messages
All log messages begin with the following fields, in this order:
■ time=[YYYY-MM-DD HH:MM:SS]
The timestamp for the log message is derived from the host switch.
■ severity=[critical | major | minor | warning | info]
One of five severity levels that is pre-assigned to each log message type.
■ pri=[0–7]
Priority of the message. The priority numbers map to the severity levels
in the severity field: 0–1 = critical; 2= major; 3=minor; 4–5 = warning;
6–7 = info
■ fw=[hostname]
The value that appears in the Hostname field of System > Settings > General.
■ id=[log message family name]
Log messages for the TMS zl Module are divided into families and subfam-
ilies. Each log message is identified by its family and a message ID that is
unique within that family. The families are as follows:
• Firewall
– fw_access_control
– fw_application_filters
– fw_l1l2_attack
• High Availability
– hacl_dplb
– hacl_vsrp
– hacl_hamanager
– hacl_configsync
•VPN
– vpn_ipsecipv4
– vpn_ikev1
– vpn_ikev2